Euromagneti srl - 23 123 50 B00

European leaders in electromagnet production and design

back to magnet finder

print magnet

Electromagnet - D.C. one-stroke
Type - 23 123 50 B00

Description.......

This type of electromagnets has been expressly studied and realized for the control of oleodynamic valves. They have a keeper sliding in a cylinder. The keeper movement takes place from the initial to the final position by means of the electromagnetic force, while the reverse motion is operated by a different force, normally a spring. The assembly position is irrelevant, but the power outlet must be set in the axial sense only, otherwise, in the presence of a side load, a considerable wear of the cylinder in which the keeper slides would occur. These appliances consist of an electrical part and a waterproof mechanical part. The electrical winding is costituted by a coil with the connector electrical contacts complying with DIN 43650.

h

photo2312350B00

drawing

Technical specifications.......

Voltage
24 Vdc
Intermittence
100% ED
Electrical input at 20 C
36 W
Max utilization pressure
200 static bar
Weight
810 gr
Pickup time
90 msec
Dropout time
65 msec.
The response time values are valid for appliances fed with voltage rating, at runout (S), with load equal to 70% of the magnetic force (F).

Protection
Complying with ISO CEI EN60529
Appliance
IP 40 with consistent assembly
Electrical connection
IP 54 with standardized DIN 43650 connector with screw plug coupling
Insulation class
F complying with norms VDE 0580.

Graph.......

The indicated magnetic force is obtained with 90% of the voltage rating at operative temperature and with assembly on a 46x46x66 mm valve and relevant 46x66x30 mm connection plate.
These data are valid with a 24 Vdc voltage.
With other voltages data can be different.

23 123 50 B00

home | company | magnets | design | contact | location